Turf Talk Newsletter
I wanted to inform the membership of a cultural maintenance practice we will be performing on the greens on Monday, August 17th and Tuesday, August 18th. The objective of this program is to
maintain turf health at an optimal level as we get ready to battle the summer heat and peak golfer and equipment traffic in July and August.
The goals of this program include:
- Venting: This helps wet spots dry out and dry spots become more receptive to water that is applied, creating a more consistent playing surface
- Compaction Relief: By making small holes in the surface and fracturing the soil, we are creating pore space to encourage deeper and stronger
rooting which will help the turf tolerate heat and traffic stress.
- Gas Exchange: Oxygen will be allowed into the soil while built-up carbon dioxide is able to escape, creating a healthy growing environment for the turf which leads to a stronger plant.
- Dethatching: Vertical mowing with a special attachment on a mower which removes thatch and organic matter.
- Topdressing: A light topdressing of sand, when incorporated into the profile will help dilute thatch and organic matter, fill in imperfections
on the surface which will lead to smoother putting conditions.
- Interseeding: We will be incorporating bent grass seed into the greens with the goal of continuing the process of converting our greens into desired monostand of bent grass.
As mentioned previously, we will be doing nine holes on Monday, August 17th and nine holes on Tuesday, August 18th. The nine holes we are working on will be closed.
We will open the holes up at a time when we successfully complete the process. The recovery time for this will be very short. I appreciate your patience allowing me to complete
this necessary maintenance practice all for the best conditions we are striving to achieve.
I have initiated a program on our tees to create more level conditions. The lumps and bumps often seen on teeing grounds are typically the result of divot injury, over-filing
or under-filling of natural soil settling. As hard as the maintenance department might try, the uneven surface conditions tend to get worse each year. The club has looked
into the process of stripping and resurfacing tees, but this would be a costly and disruptive option.
The program I am undertaking has 3 simple steps:
- Irrigate the tee to saturate the root zone.
- Aerate with 5/8" solid tines.
- Roll the tee surface with a putting green roller.
This practice performed 3-4 times a year has been effective in smoothing surface imperfections of 3/4" and less.
We apologize for any inconvenience this may cause and appreciate your patience during this necessary course maintenance.
BTCC Golf Course Superintendent